APPLY THE TACK COAT
Use a roller, brush or suitable application tool to apply a thin, even layer of the supplied tack coat.
Easihold Stone-In-One Water-Based Resin Bound Surfacing Kit
NEW PRODUCT LAUNCH
PRE-ORDER STONE-IN-ONE
Our new Water-Based Resin Bound Surfacing Kit is available to pre-order. Choose your preferred finish below and be among the first to try our ready-to-use surfacing solution.
Colour:Oyster Shell
PRE-ORDER NOW OPEN
All pre-orders will be dispatched on Monday, 26 October 2026.
Place your order as normal. Payment is taken at checkout.
Quantity:
Choose options
NEW PRODUCT LAUNCH
PRE-ORDER STONE-IN-ONE
Our new Water-Based Resin Bound Surfacing Kit is available to pre-order. Choose your preferred finish below and be among the first to try our ready-to-use surfacing solution.
Colour:Oyster Shell
PRE-ORDER NOW OPEN
All pre-orders will be dispatched on Monday, 26 October 2026.
Place your order as normal. Payment is taken at checkout.
Quantity:
NEW PRODUCT LAUNCH
PRE-ORDER STONE-IN-ONE
Our new Water-Based Resin Bound Surfacing Kit is available to pre-order. Choose your preferred finish below and be among the first to try our ready-to-use surfacing solution.
Colour:Oyster Shell
PRE-ORDER NOW OPEN
All pre-orders will be dispatched on Monday, 26 October 2026.
Place your order as normal. Payment is taken at checkout.
Quantity:
EASIHOLD STONE-IN-ONE
THE READY-TO-USE WATER-BASED RESIN BOUND SURFACING KIT.
Transform your outdoor space with Stone-In-One.
Easihold Stone-In-One is an innovative, ready-to-use water-based resin bound surfacing kit designed for both horizontal and vertical landscaping applications.
It combines a pre-mixed aggregate blend with Easihold binder technology and a dedicated tack coat, plus 1m² of Easihold SRM (structural reinforcement mesh) for horizontal application, giving you a straightforward alternative to traditional systems that require measuring, mixing and specialist preparation.
1m²
ONE KIT. THREE KEY COMPONENTS.
Includes pre-mixed Stone-In-One, dedicated tack coat and 1m² of Easihold SRM (structural reinforcement mesh) for horizontal application.
WHERE TO USE STONE-IN-ONE
MORE THAN JUST A GARDEN SURFACE.
Create a decorative, hard-wearing finish across a wide range of outdoor landscaping projects.
Garden Paths
Steps
Raised Beds
Garden Walls
Planters
Garden Features
Stone-In-One is designed for both horizontal and vertical applications on appropriate prepared surfaces, giving you the flexibility to create a consistent decorative finish throughout your outdoor space.
The kit includes 1m² of Easihold SRM (structural reinforcement mesh) for horizontal floor applications. SRM is developed using technology to reinforce earth structures. It can be applied over suitable prepared surfaces such as concrete, loose stone, gravel and most paving structures to help mitigate movement and subsequent reflective cracking.
HORIZONTAL & VERTICAL APPLICATION
For horizontal applications, a permeable surface or suitable drainage and run-off area is required.
SIMPLE APPLICATION
READY TO USE. NO MIXING REQUIRED.
Stone-In-One has been developed to make water-based resin bound surfacing more accessible to homeowners.
APPLY STONE-IN-ONE
Work in manageable sections and apply the pre-mixed aggregate directly onto the prepared surface.
TROWEL & FINISH
Use a trowel to spread, smooth and lightly knit the aggregate together to create an even finished surface.
TIP
WORK IN SMALL SECTIONS
Once application begins, work in manageable sections to maintain a consistent finish.
BUILT FOR OUTDOOR SPACES
DURABLE. UV STABLE. IMPACT RESISTANT.
Once cured, Easihold Stone-In-One forms a durable, hard-wearing and impact-resistant surface designed for external landscaping applications.
Stone-In-One is fully UV stable, helping the finished surface withstand exposure to sunlight.
✓
HARD-WEARING FINISHDesigned for long-lasting external decorative applications.
✓
IMPACT RESISTANTProvides a durable finished surface once fully cured.
✓
UP TO 5 YEARSCorrectly applied on a suitable, free-draining base, the finished surface can last up to 5 years.
✓
FOOT TRAFFICSuitable for light to heavy foot traffic once fully cured.
GARDEN FURNITURE FRIENDLY
Garden furniture can be used when Stone-In-One is applied to a suitable solid base. Protective pads or caps beneath furniture legs are recommended.
KIT SIZE & COLOURS
ONE KIT. FOUR COLOURS.
Each Stone-In-One kit includes the pre-mixed aggregate blend, dedicated tack coat and 1m² of Easihold SRM (structural reinforcement mesh) for horizontal application. The kit provides approximately 1m² coverage at the recommended 8–12mm application depth.
1m²
APPROXIMATE COVERAGE
Includes 1m² of Easihold SRM (structural reinforcement mesh) for horizontal application. Approximate kit coverage is 1m² at the recommended 8–12mm depth; actual coverage varies with surface conditions and application depth.
Choose the finish that best suits your outdoor space from our four colours:
Oyster Shell
Ibiza Sands
Raven Tide
Aura Grey
MORE COLOURS TO COME
Additional Stone-In-One colour blends are planned for the range.
IMPORTANT APPLICATION INFORMATION
APPLY CORRECTLY. GET THE BEST FINISH.
For the best results, Stone-In-One should be applied in suitable weather conditions and to an appropriate prepared surface.
5–30°CAPPLICATION TEMPERATUREApply between 5°C and 30°C and protect the product from freezing during storage.
48HKEEP DRYAllow at least 48 hours of dry weather after application to allow the system to cure.
8–12mmRECOMMENDED DEPTHApply at the recommended 8–12mm finished depth. Thicker applications may require longer curing times.
The top layer cures first while the underlying material continues to strengthen. Cure times can vary according to application depth, temperature, humidity and weather conditions.
NOT SUITABLE FOR VEHICLE TRAFFIC
Stone-In-One is designed for decorative landscaping and pedestrian applications and is not suitable for driveways or vehicle traffic.
CHOOSE YOUR APPLICATION
Three clear guides to help you prepare, apply and finish your Stone-In-One project.
NO MIXING REQUIRED
WATER-BASED RESIN BOUND SURFACING KIT
GUIDE 01
SOLID HORIZONTAL APPLICATION
For suitable solid, prepared bases such as concrete and stable paving slabs. SRM (structural reinforcement mesh) is required. Each kit includes pre-mixed Stone-In-One, a dedicated tack coat and 1m² of SRM. For solid horizontal applications, SRM must be used to support strength and longevity and installed in accordance with the supplied mesh instructions.
SUITABLE SOLID BASE
≈ 1m²
PER KIT
For suitable solid, prepared bases such as concrete and stable paving slabs.
RECOMMENDED FINISHED DEPTH: 8–12mm
SRM IS REQUIRED FOR SOLID HORIZONTAL APPLICATIONS
Each kit includes 1m² of SRM for horizontal application. SRM helps mitigate surface movement and subsequent reflective cracking. To support strength and longevity, it must be used on solid horizontal bases and installed in accordance with the supplied instructions for your chosen base.
5 SIMPLE STEPS
PREPARE. COAT. REINFORCE. TROWEL. CURE.
STEP 01
PREPARE THE BASE
Make sure the surface is suitable, stable, clean, dry and free from dust, dirt and contaminants before beginning the application.
STEP 02
APPLY THE TACK COAT
Apply a thin, even layer of the supplied tack coat using a suitable roller, brush or application tool. Work in manageable sections of approximately 0.3m².
STEP 03
APPLY THE SRM
After applying the tack coat, lay the supplied SRM (structural reinforcement mesh) over the prepared horizontal base. Follow the supplied mesh installation instructions and position the mesh as directed before applying Stone-In-One.
STEP 04
APPLY & TROWEL
Apply the pre-mixed Stone-In-One to the prepared, tack-coated area. Spread and lightly trowel to an even finish at the recommended 8–12mm depth. Approximate working time is 20 minutes, so work methodically in manageable sections.
STEP 05
PROTECT & CURE
Protect the new surface from rain and moisture. Allow at least 48 hours of dry weather after horizontal application. Cure times vary with temperature, humidity, surface conditions and application depth.
AFTER FULL CURING
CLEANING & MAINTENANCE
HORIZONTAL SURFACES
KEEP YOUR FINISH LOOKING ITS BEST
Once fully cured, clean the surface with soapy water and a medium-bristle brush. Jet washing can also be used after full curing.
- Hold the jet approximately 300mm from the surface.
- Keep the lance at around a 90° angle to help avoid damage.
- Allow the surface to fully cure before cleaning or use.
GUIDE 02
LOOSE STONE & GRAVEL APPLICATION
For suitable loose material between 5–40mm, compact the surface, apply a thin Stone-In-One capping layer, then position two layers of SRM with the second layer angled slightly differently from the first. After the assembly has cured for 5 hours, apply the final Stone-In-One layer. Tack coat is not required.
LOOSE STONE / GRAVEL
≈ 0.5m²
PER KIT
Allow approximately half the coverage because this method uses two Stone-In-One layers and two layers of SRM to help build stability and strength over an inconsistent surface with gaps and voids. Tack coat is not required for loose stone or gravel.
SUITABLE LOOSE MATERIAL: 5–40mm
LOOSE STONE · STEP 01
COMPACT THE SURFACE
Compact the loose stone or gravel as evenly as possible to create a firmer, more stable surface before applying the thin Stone-In-One capping layer.
LOOSE STONE · STEP 02
APPLY THE THIN CAPPING LAYER
Apply a thin layer of Stone-In-One directly over the compacted loose stone. Spread and lightly trowel it to create a flat, even capping layer before positioning the SRM.
LOOSE STONE · STEP 03
POSITION BOTH SRM LAYERS
Position the first layer of SRM over the thin Stone-In-One capping layer, then place the second SRM layer over it at a slightly different angle. Follow the supplied mesh installation instructions.
LOOSE STONE · STEP 04
APPLY THE FINAL TOP LAYER
Apply the final layer of Stone-In-One over the cured build-up. Spread and lightly trowel the material to create an even decorative finish.
LOOSE STONE & GRAVEL: EXTRA REINFORCEMENT FOR A STRONGER FINISH. This method uses two layers of Stone-In-One with two layers of SRM to help improve stability and durability across loose, uneven surfaces. Each kit includes 1m² of SRM, so allow approximately 2 kits per 1m² for the reinforced application. The additional material helps account for gaps and voids and build a more stable finish. Tack coat is not required. Suitable loose material: 5–40mm.
STEP-BY-STEP VIDEO
WATCH THE VERTICAL APPLICATION GUIDE
See how to apply Easihold Stone-In-One to suitable vertical surfaces.
GUIDE 03
VERTICAL APPLICATION
Apply Stone-In-One to suitable, properly prepared vertical or inclined surfaces such as walls and planters. The supplied SRM is for horizontal applications only.
BEFORE YOU START
Choose a suitable, stable surface and make sure it is clean, dry and free from contaminants. Always check substrate suitability before starting.
4 SIMPLE STEPS
PREPARE. COAT. APPLY. CURE.
STEP 01
PREPARE THE SURFACE
Select a suitable, stable vertical or inclined surface. Ensure it is clean, dry and free from dust, dirt and other contaminants.
STEP 02
APPLY THE TACK COAT
Use a suitable roller, brush or tool to apply a thin, even layer of the supplied tack coat to the selected area. work in manageable sections or the Tack Coat will dry before the next step!
STEP 03
APPLY & TROWEL
Apply Stone-In-One to the tack-coated surface using a trowel. Start at the lower section and work upwards, using firm, even pressure and manageable sections to create a consistent finish.
STEP 04
PROTECT & CURE
Protect the newly applied surface from rain and moisture. Allow 48–72 hours of dry weather for curing. Conditions and application depth can affect the time required.
AFTER FULL CURING
CLEANING & MAINTENANCE
VERTICAL SURFACES
KEEP YOUR FINISH LOOKING ITS BEST
Once fully cured, clean the surface with soapy water and a medium-bristle brush. Jet washing can also be used after full curing.
- Hold the jet approximately 300mm from the surface.
- Keep the lance at around a 90° angle to help avoid damage.
- Allow the surface to fully cure before cleaning or use.
IMPORTANT
GET THE CONDITIONS RIGHT
5–30°CApply within the recommended temperature range.
DRY WEATHERDo not install during rain.
PROTECTKeep the surface protected from rain and moisture during curing.
EASIHOLD STONE-IN-ONE
How much Stone-In-One will you need?
Enter your dimensions to estimate how many kits you need. Coverage is approximately 1m² per kit on suitable solid surfaces, or 0.5m² per kit on loose stone or gravel.
For a rectangular floor, patio or path, measure the length and width in metres.
Total area0.00 m²
Kits required0 kits
SRM reinforcement mesh includedEach kit includes 1m² of SRM reinforcement mesh for horizontal applications. On suitable solid surfaces, allow approximately 1m² coverage per kit.
Enter both dimensions above to calculate your requirements.
Coverage is approximate and varies with the substrate, preparation, application technique and finished depth. Recommended depth: 8–12mm. Apply between 5°C and 30°C in dry conditions and protect from rain and moisture during curing. Not suitable for driveways or vehicle traffic.
Product Application
Can Easihold Stone-In-One be used on a driveway?
No. Easihold Stone-In-One is not suitable for driveways or vehicle traffic.
Is Easihold Stone-In-One suitable for foot traffic?
Yes. Once fully cured, Stone-In-One can support light to heavy foot traffic.
Can Easihold Stone-In-One support garden furniture?
Yes, when Stone-In-One is applied to a suitable solid base, such as concrete. Surfaces applied over loose or unstable material are not suitable for supporting furniture. We recommend allowing at least one week before placing furniture or other objects on the surface. For furniture with isolated point loads, use protective caps or pads beneath the legs.
Does Easihold Stone-In-One work on loose material?
Yes. For suitable loose stone or gravel between 5 and 40mm, use the mesh-reinforced method: compact the surface, apply a Stone-In-One capping layer, position the supplied SRM reinforcement mesh following the installation instruction, then apply the final Stone-In-One layer. Tack coat is not required for this method. Allow approximately 0.5m² coverage per kit because this method uses two Stone-In-One layers (capping & top layer) and two lots of mesh reinforcement to help build stability and strength.
Is Easihold Stone-In-One safe for plants, pets and the environment?
Stone-In-One is non-toxic. Always follow the application and curing instructions and allow the surface to fully cure before use.
Can Easihold Stone-In-One be removed?
The recommended removal method is currently being confirmed. Please contact Easihold for advice before attempting removal, as the appropriate approach may depend on the surface and installation.
Weather and Durability
How long after application should the surface be kept dry?
We highly recommend allowing at least 48 hours of dry weather after horizontal application to help the system cure. For vertical applications, allow 48 to 72 hours of dry weather. Protect the newly applied surface from rain and moisture during curing.
How long do I wait if applying multiple layers?
For a second layer, wait until the top layer of the first coat has cured, usually around 4 to 6 hours. For the mesh-reinforced loose-stone method, follow the dedicated guide and allow 5 hours after applying the capping layer and positioning the second mesh before applying the final top layer.
How long will Stone-In-One last?
When correctly applied to a suitable, free-draining base, a Stone-In-One surface can last up to 5 years.
Is Stone-In-One UV stable?
Yes. Stone-In-One is UV stable and designed to withstand exposure to sunlight.
Will Stone-In-One hold up in winter?
Stone-In-One should not be submerged in water for extended periods. Apply it to a suitable surface with effective drainage or run-off points to help prevent water-related breakdown.
Product Storage and Maintenance
How can I clean a Stone-In-One surface?
Once fully cured, the surface can be cleaned with soapy water and a medium-bristle brush. Jet washing is also suitable after full curing. Hold the lance approximately 300mm from the surface and keep it at around a 45-degree angle to help avoid damage.
How long can you store Stone-In-One?
Stone-In-One has an unopened shelf life of 2 years.
What conditions should Stone-In-One be stored in?
Store Stone-In-One in a cool, dry place and protect it from freezing.
How long after opening can Stone-In-One be used for?
Once opened, Stone-In-One can be used for up to 2 months if it is re-lidded with the lid fully secured. Tack coat can also be reused if it is sealed sufficiently, for example by taping or folding over the pouch.
Can weed killer be used on the surface?
Yes. Weed killer can be used on a fully cured Stone-In-One surface. We do not recommend using it directly before or after application.
Coverage and Application Methods
How much area does Stone-In-One cover?
On a suitable solid base, one kit covers approximately 1m² at the recommended finished depth of 8 to 12mm. For loose stone or gravel, allow approximately 0.5m² per kit because the mesh-reinforced method uses two Stone-In-One layers. Actual coverage depends on the surface and application depth.
How long does it take for a Stone-In-One surface to cure?
The top layer typically cures in around 4 to 6 hours, while the material underneath continues to strengthen. The full system generally takes around 24 to 48 hours to cure. Cure times vary with application depth, weather, temperature and humidity. Wait until the system is fully cured before walking on the surface.
What is the working time of Stone-In-One?
Once application begins, the product has an approximate working time of 20 minutes, during which it can be trowelled and the aggregate can knit together. Work methodically in manageable sections to help achieve a consistent finish.
What depth should Stone-In-One be applied at?
The recommended finished depth is 8 to 12mm. Application thickness affects curing time, and thicker applications may need longer to cure.
How long after applying the tack coat should I apply Stone-In-One?
Apply Stone-In-One immediately after the tack coat because the tack coat can cure quickly. Work in small, manageable sections of approximately 0.3m². Tack coat is not required for the mesh-reinforced loose-stone method.